StewMac Neck Shim .5 Degrees - Maple - for bolt-on necks - Universal

This listing is for one(1) .5 degree shim. 

Tapered maple shims used to change the angle of a bolt-on neck.

To change the angle of a bolt-on neck, players and repair shops have used shims for years. We've seen everything from matchbook covers to guitar picks stuck in neck joints.

Those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. 

• 0.25-degree shim offers the most versatility. Stacking them will let you really dial in the neck angle you're after.
• 0.5-degree shim is the one you'll reach for most often. It works great on Fender and many other solidbodies.
• 1-degree shim is great for guitars with a Tune-o-matic bridge or Floyd Rose.

Taper specs (approximate)
0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)
0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm)
1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm)

Dimensions
Shaped: 2-3/16" x 3" (55.56mm x 76.12mm)
Blank: 2-1/4" x 3" (57.15mm x 76.12mm)

Shaped shims fit most neck pockets with a rounded heel. You can trim along the lasered line to fit the shim to a pocket with a flat heel, like a Tele.

Made of solid maple to match the guitar neck.